EVERBUILD® Lumberjack® 5 Min PU Wood Adhesive
EVERBUILD® Lumberjack® 5 Min PU Wood Adhesive Liquid is ideal for larger applications, or in the workshop where greater economy is required. Sets hard in 5 minutes. Conforms to EN 204 D4 waterproofing. EVERBUILD® Lumberjack® 5 Min PU Wood Adhesive Gel is a thixotropic, gap filling gel which sets hard in just 5 minutes. Particularly suitable for equipment manufacture and production line applications where rapid handling is required.
- Fast setting – 5 minute set (Typical PVA based wood glue – 8-12 hours).
- Exceptional bond strength to wood and most common building surfaces.
- Internal and external use – excellent weathering and aging properties.
Specific Data Contents 100 % prepolymers and catalyst (solvent free) Solids 100 % (Solvent free) Viscosity Gel – 200×103 mPa.s
Liquid – 2×103 mPa.s
Usage
- General wood jointing and construction.
- Window and door frame manufacture.
- Door manufacture.
- Furniture manufacture.
- Construction of staircases and ladders.
- As a high quality insulation adhesive for foam/glass wool/fibre boarding.
Advantages
- Fast setting – 5 minute set (Typical PVA based wood glue – 8-12 hours).
- Exceptional bond strength to wood and most common building surfaces.
- Internal and external use – excellent weathering and aging properties.
- Fully water proof to EN204 D4.
- Products foam slightly on application to fill small gaps and increase overall bond strength.
- Excellent chemical resistance.
Specific Data Contents 100 % prepolymers and catalyst (solvent free) Solids 100 % (Solvent free) Viscosity Gel – 200×103 mPa.s
Liquid – 2×103 mPa.s
Packaging
Gel – 310 ml Cartridge
Colour
Gel -Transparent
APPROVALS / STANDARDS
Conforms to EN204 class D4.
Chemical Base
Polyurethane
Shelf Life
Twelve months from date of manufacture in original unopened containers.
Storage Conditions
Store in original unopened containers between +5 and +25 °C. Reseal immediately once used or disposal will be necessary.
Density
Liquid – 1.12 g/cm3 / Gel – 1.10 g/cm3
Application
Yield
Liquid – Approx 400 g/m2, Gel – Approx 225-355 ml/m2
SUBSTRATE PREPARATION
The surfaces to be glued should be clean and free from dust, grease and other contaminants. At least one of the materials must be porous. Roughen non-porous surfaces to give a key for the adhesive. To assist cure and achieve maximum bond strength, slightly moisten one surface with a damp cloth. Do not over wet.