☰

🚚 Delivery within 5 to 10 working days. 📦 Last day for Xmas delivery is 13th December

Soudal Souda Bond Easy Gun PU Adhesive 750ml

£9.92

Last 9 available
(You can order more than what’s available to get it shipped as soon as we restock)

SKU: FR00719

Soudal Souda Bond Easy Gun PU Adhesive 750ml PU foam adhesive Soudabond EASY is a high performance polyurethane adhesive foam. Quick and easy to use – no mixing required. Replaces traditional powder based adhesives. The formula combines strong adhesion with filling characteristics, making it suitable for bonding uneven surfaces. Used for the bonding of many…

Description

Soudal Souda Bond Easy Gun PU Adhesive 750ml

PU foam adhesive

Soudabond EASY is a high performance polyurethane adhesive foam. Quick and easy to use – no mixing required. Replaces traditional powder based adhesives. The formula combines strong adhesion with filling characteristics, making it suitable for bonding uneven surfaces. Used for the bonding of many building materials, such as insulation panels, plasterboard and the construction of interior walls using lightweight building blocks.

Open technical datasheet

Shown product

Soudabond Easy Gun 750ml

Featured properties

Ready to use, does not require mixing
Quick drying, can be worked after 1 hour
Thermal and acoustic insulation
Not UV resistant
Solvent-free – Reduced working time up to 30 %
High initial adhesion – even at low temperatures
Economical to use, because it is precisely dosed
Also suitable for vertical bonding
Shapeable from a box temperature of +5 ° C or an ambient temperature of -5 ° C
Thermal conductivity of 0.035 W/(m.K) for an ideal addition to the insulating panels when filling the joints
Flexible and non-brittle
Equalizes irregularities optimally
Huge reduction in weight and space compared to conventional PU adhesives, cement-adhesives etc …
Insensitive to aging, rot-proof, resistant to months Water resistant (but not waterproof).

Applications

Durable, economical, clean and efficient bonding of thermal insulation panels.
Suitable for bonding insulation panels based on rigid PS (EPS + XPS), polyurethane (PUR / PIR) and phenolic foam in areas: platform roofs , perimeters, facades, drainage or insulation elements, cellar ceilings, interior insulation, etc.
Bonding of fibro-plaster / cardboard plaster panels in dry construction
Bonding of non-load-bearing interior walls, such as partitions, stone shelves, etc.

Instructions

Wear safety goggles. Ensure there is sufficient ventilation and keep away from flames. Make sure surfaces are clean and free of grease and dust. Spraying water on the surfaces will improve adhesion and speed up curing. Shake can vigorously for 30 seconds. Repeat regularly for maximum yield. Use upside down. Point nozzle and press trigger. Amount of trigger pressure defines speed at which foam extrudes. Apply PU Adhesive according to application, as per the technical data sheet. Apply in a zig-zag pattern onto one of the surfaces to be bonded. Wait until the foam becomes sufficiently tacky; i.e. thread is formed between gloved finger and adhesive when briefly touching adhesive (usually about 4 minutes depending on conditions). Then press materials firmly together for 30-60 seconds. Leave to cure for at least 1 hour before applying loads. Store can upright in dry conditions between +5°C and +25°C.

Additional information

Dimensions	350 × 65 × 65 mm
tools-accessories	Adhesive

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Soudal Skeleton Gun Orange
£6.90
Add to basket

Category: Adhesives, Stair Fitting Accessories

Tags: Adhesive, Bond, Gun PU Adhesive, PU Adhesive