Soudal Light Brown Hybrid Universal Parquet Floor Adhesive
Hybrid polymer timber flooring adhesive
Soudal Universal Parquet Floor Adhesive is a universally applicable water-free polymer for gluing multi-layered and solid parquet floor with tongue and groove. Also suitable for gluing exotic woods.
Open technical datasheetFeatured properties
- Elastic
- EC-1R PLUS label: very low emission
- Ready to use, single component
- Solvent free
- Contains no water
- Free of isocyanates
- Easy to apply
- Forms stable peaks once applied by a notched trowel or spreader comb
- Rapid cure and build up of final bond strength
- High final bond strength (according to EN14293)
- Suitable for underfloor heating
- Avoids staining of the hands
Applications
- Suitable for use on porous and non-porous substrates such as mosaic, anhydrite, concrete, screeds, wood, chipboard and OSB Board (large particle size chipboard), including floors with underfloor heating and cooling.
Instructions
- Adhesive should be acclimatised to room temperature before installation. Apply the adhesive to the surface by means of notched Soudal trowel N°11. Do not apply more to the surface than can be covered with parquet within 30 minutes. Slide the parquet onto the adhesive layer and tap into place or tamp down with a rubber hammer. A minimum of 80% contact coverage is required to ensure a perfect adhesion. Loading the parquet with weights will improve the final bond strength. Wait at least 24 h before sanding and finishing the parquet.
